DSP 9612 DCE 19.2

The DCE Fast Poll modem is designed and manufactured from the ground up for rugged industrial communication networks. Boasting the latest innovative digital signal processing (DSP)-based communication device, the DSP19.2FP delivers a cost-effective 19200 bps asynchronous solution for point-to-point and multipoint connectivity. The DSP19.2FP Fast-Poll modem is ideal for industrial communication applications including SCADA systems, RTUs, traffic monitor and control, and industrial automation networks. The DSP19.2FP supports RTUs with an EIA RS-232 or RS-485 serial port at speeds of 19200, 9600, 2400, and 1200 bps. The DSP19.2FP Fast Poll modem is designed to operate over 4-wire or 2-wire unconditioned leased lines or private metallic circuits. For optimum
performance, the modem employs QAM and FSK modulations to communicate over a variety of transmission lines.

The DCE DSP19.2FP Fast Poll modem is designed to operate with a wide range of AC or DC power supply voltages and temperatures. With proven reliability and ease of installation, the DSP19.2FP is ideal for point-to-point and point-to-multipoint polling networks, where high speed and low-network latency are critical for system performance.

Specifications:
Data Rate Support Data Speed: 19200, 9600, 2400 bps in fast poll mode 0-1800 bps in Bell 202T mode 0-1200 bps in ITU-V23 mode Data Format: Asynchronous, 8 or 9 data bits 10- or 11-bit character with 1 or 2 stop bits Modulation QAM for 19200, 9600 and 2400 bps in fast poll mode FSK for 0-1200 or 0-1800 for V23 or Bell 202T mode Modem Equalizers Automatic & adaptive equalizer Enhanced fixed cable equalizers for extended range Transmission Line Interface Leased Line: TELCO voice band 2- or 4-wire leased lines Private or metallic circuits 2- or 4-wire, 19-26 AWG Connector: 5-position terminal block with safety ground. DTE/RTU Interface The modem provides serial ports to support both the RS-232 and RS-485 interface standards: RS-232 Interface Connector: DB9-F Signals: RTS, CTS, CD, TD, RD, DSR, SG RS-485 Interface Connector: RJ-11 Signals: 4-wire full-duplex: TX+, TX-, RX+, RX-		Front Panel Indicators & Controls LED. Indicators: RTS, CTS, TD, CD, RD, DSR, ALB, DLB TEST Switch: Push Button for Analog Loopback, Digital Loopback, and Remote Digital Loopback Power Supply Specifications Three models support various power options: Stand-alone: 90-264 VAC Stand-alone: 10-48 VDC Rack mount: RM16M module Power Consumption: Idle mode: 2 watts Normal mode: 5 Watts, typical Mechanical Specifications Enclosure dimensions: 5.0”(W) x 6.75”(L) x 1.3” (H) 127mm(W) x 172mm(L) x 33mm(H) Weight: 1.0 pound, without AC power module Environment Specifications Temperature: Operation: -40o to + 85o C Storage: -40o to +100o C Humidity: Up to 95 % non-condensing Dry Contact Detection (optional) 2 optical isolated dry contact detections are provided for external devices (consult DCE for additional information