|
The Data Connect ANS205-FT product uses
Ethernet for transmitting a signal up to 2 Km(6,600 ft), and is
the perfect solution for applications where
transmission must be protected from electrical exposure, surges,
lightning or chemical corrosion.
The Data Connect
ANS205-FT operates at either half or full duplex mode. In full
duplex mode The range is 2km with 62.5/ 125μm fiber cables; in
half duplex mode, range is 412m with 62.5/ 125μm fiber
cables.
The Ethernet supports 10/ 100M
auto-negotiation feature and auto MDI /MDIX function.
- Automatic MDI / MDI-X crossover for
plug-and-play
- Each port supports both 10/100 Mbps
speed auto negotiation
- Store-and-forward architecture
- Full duplex IEEE 802.3x and half duplex
backpressure flow control
- 3.2Gbps high performance memory
bandwidth
- Frame buffer memory:512 Kbit
- Integrated look-up engine with dedicated
1 K unicast MAC addresses.
- Supports +10~+30Vdc voltage
- Supports operating temperatures from 0 ~
+70°C
- DIN rail mount for industrial usage
- Compatibility: IEEE 802.3,
IEEE802.3u, IEEE802.3x
- Interface: 10/100 Base-T(X) and
100 Base-FX(ST Connector; Multi-mode)
- Ethernet Port: 10/100 Mbps x 4
- Fiber Optic Port: 100 Mbps x 1
- Provides LEDs for network and
power monitoring
- ESD Protection:
- 8 KV Contact Discharge
- 15KV Air-Gap Discharge
- Fiber Optic Transmission
distance:
- Multi mode fiber:50/125,
62.5/125 or 100/140 μm
- Multi mode fiber,412 m for
half duplex, 2 km for full duplex
- Ethernet Cables:
- 10 Base-T (Cat.3, 4,5 UTP
cable; 100m Max.)
- 100 Base-TX (Cat.5 UTP
cable; 100m Max.)
- Environment:
- Operating temperature: 0 °C
~ +70°C
- Storage Temperature: -20 ~
+85°C
- Relative Humidity: 10% to
90% non-condensing
- Dimensions: 64 x 110 x 98 mm (W
x H x D)
- Power requirements: +10 to
+30Vdc (Removable Terminal Block)
- Power consumption: 0.14A@24Vdc
(+/- 5%, arrowed)
|
|