 |
|
|
1-888-492-6526
DATA CONNECT MNS208R-M
8-PORT INDUSTRIAL 10/100 MANAGED RING SWITCH
MNS208R-M 8 10/100 port ring switch
MNS208R-M-Metal 8 10/100 port ring switch+metal
The RS-408 is a 8-Port Industrial Ethernet(10/100Base-TX) Real-Time Redundant Ring Switch. RS-408 supports 10/100M auto-negotiation feature and auto MDI /MDIX function. It can automatically switches the transmission speed (10 Mbps or 100 Mbps) for corresponding connections. The connectors of Ethernet port are shielded RJ-45. The shielded RJ-45 connectors offer a high reliability Ethernet environment for industrial control and automation.
RS-408 built-in ICP DAS Cyber-Ring technique that enable multiple switches to be placed into a redundant ring. It detects and recovers from a fiber or copper link failure within approximately 300ms – for the majority of applications a seamless process. Modbus/TCP, Modbus/RTU and OPC supported, SCADA application can monitor status of Ethernet and fiber port with Modbus or OPC protocol.
RS-408 provides two power inputs that can be connected simultaneously to live DC power sources. If one of the power inputs fails, the other live source acts as a backup to automatically support the RS-408's power needs. And, the relay output facility can deliver warning signal while dual power or network link failure.
The RS-408 is a 8-Port Industrial Ethernet(10/100Base-TX) Real-Time Redundant Ring Switch. RS-408 supports 10/100M auto-negotiation feature and auto MDI /MDIX function. It can automatically switches the transmission speed (10 Mbps or 100 Mbps) for corresponding connections. The connectors of Ethernet port are shielded RJ-45. The shielded RJ-45 connectors offer a high reliability Ethernet environment for industrial control and automation.
RS-408 built-in ICP DAS Cyber-Ring technique that enable multiple switches to be placed into a redundant ring. It detects and recovers from a fiber or copper link failure within approximately 300ms – for the majority of applications a seamless process. Modbus/TCP, Modbus/RTU and OPC supported, SCADA application can monitor status of Ethernet and fiber port with Modbus or OPC protocol.
RS-408 provides two power inputs that can be connected simultaneously to live DC power sources. If one of the power inputs fails, the other live source acts as a backup to automatically support the RS-408's power needs. And, the relay output facility can deliver warning signal while dual power or network link failure.
- Automatic MDI / MDI-X crossover for plug-and-play
- Each port supports both 10/100 Mbps speed auto negotiation
- Store-and-forward architecture
- Full duplex IEEE 802.3x and half duplex backpressure flow control
- 3.2Gbps high performance memory bandwidth
- Frame buffer memory : 1 Mbit
- Integrated look-up engine with dedicated 2 K unicast MAC addresses.
- Redundant Power Inputs +10 ~ +30V DC
Power failure alarm by relay output - Supports operating temperatures from -30°C ~ +75°C
- DIN rail mount for industrial usage
| Technology | |
| Completely compliant | IEEE 802.3, IEEE 802.3u, IEEE802.3x |
| Ethernet switch type | Intelligent store & forward |
| MAC addresses supported | 2K |
| Memory Bandwidth | 3.2 Gbps |
| Interface | |
| RJ45 ports (shielded) | 10/100BaseT(x) |
| RJ45 speed (auto-negotiating) | 10 Mbps or 100 Mbps |
| RJ45 auto-mdi/mdi-x | All 8 ports |
| Ethernet isolation | 1500 VRMS 1 minute |
| Power | |
| Required supply voltage | +10 ~ +30 VDC |
| Power input isolation | 1KV |
| Power consumption (Redundant input terminals) |
8 W (typical - all ports active at 100 Mbps) |
| Mechanical | |
| Case | Plastic |
| Flammability | UL 94V-0 |
| Dimensions | 64mm x 110mm x 97.5mm (W x H x D) |
| Installation | DIN rail mount |
| Environmental | |
| Operating Temperature | -30 ~ +75°C |
| Storage Temperature | -40 ~ +85°C |
| Include cable | |
| CA-090510 x 1 | |
1-888-492-6526
© 2010 Data Connect Enterprise
3405
Olandwood Court
Olney, Maryland 20832
